Brass conduit fittings are connectors and fittings used to connect one piece of conduit to another, or to connect conduit to an electrical box. Conduit and brass conduit fittings form systems to route and protect wire and cable.
Applications of brass conduit fittings include protection of fiber optic cable, cable carrier installation, robot assembly, automotive applications and high voltage signs and lighting.
Types of Brass Conduit Fittings
Standard Brass Conduit Fittings
Standard Brass Conduit Fittings are the common conduit fittings. Jixiang’ brass conduit fittings are made of high quality nickel plated brass and can stand up to demanding wet and corrosive environments, including power generation, petrochemical, food, beverage, pharmaceutical plants and anywhere high performance is required.
The 90 degree Brass Conduit Fittings is designed to 90-degree elbow that is particularly applicable for limited space where the wiring system. One end of the 90 degree brass conduit fittings with a metal ring is connected with the metal hose, and the other end is threaded to the cable box, switch box, distribution box, motor, etc
The parts of Brass Conduit Fittings:
Lock Nut, O-ring, Main Body, Ferrule,Ring, Sealing Nut
After adding claw and seal, the brass conduit fittings can also be connected to cables.
How to install Brass Conduit Fittings?
1.Cutting Conduit
Conduit cutters can be used to cut nonmetallic conduit, Metallic conduit should be cut with a fine-tooth hacksaw or bandsaw. Ensure you make a straight, vertical cut.
2.Assembling Brass Conduit Fittings
First,place the sealing nut on the conduit followed by ring (note the orientation).
Next, cover the ferrule into the end of the conduit, then screw the main body, O-ring
Tight the Locknut in the end.
3.Connect to the Enclosure
Screw whole conduit and fit into the housing until it’s in the right place.
Jixiang Connector’s brass conduit fittings offer solutions for :
Dustproof and Waterproof
Continuous operation
Suitable for indoor or outdoor use
Reduced installation time & cost
Jixiang Connector is a professional manufacturer from China.
If you’re interested in brass conduit fittings, please contact us without any hesitation.